[HFDlist] Single gas meters

[bpatch at holdenma.gov]

Good morning, today we put new single gas meters in service for each  
of the ambulances.  The meters are attached to the shoulder strap of  
the blue first in bags.  The meters are set to alarm for CO on the low  
side at 35ppm and the high side at 200ppm. These meters should not be  
used for primary metering and should be used only as an indicator for  
crews that there is CO present at your location. The meters are good  
for 24 months and there is a countdown display on the front of the  
meter indicating its remaining lifespan.  If the meter does go into  
alarm, it will need to be brought to fresh air for resetting, which is  
done by holding down the blue button located on the right side of the  
meter, for 5 seconds. I have attached the link from the manufacturer  
for more operating instructions.


https://sps.honeywell.com/us/en/products/safety/gas-and-flame-detection/portables/bw-clip-series



Thanks


Bryan

-- 
Bryan Patch
FF/NREMT-P
Holden Fire Department